Overhead Track & Rail Systems for short wave infra-red curing
The Spectratherm Overhead Track System was specifically designed to maximize vehicle throughput. Utilizing the Short
Wave Infra-Red curing process, it combines; lamps, unique
reflectors, lamp array, and a Thermal Integrated Sensor
System (TISS) to significantly reduce standard curing and
drying times.
The Short Wave Infra-Red curing heads are suspended from an overhead track system, freeing up valuable floor space.
An "easy glide" bridge assembly makes positioning the curing
heads on any vehicle panel effortless. The articulating arm can position the array as low as 9 inches off the shop floor or raise
it above the tallest SUV.
There is no maneuvering of portable floor systems between
tightly spaced work bays, eliminating any fear of accidental
vehicle damage. The innovative track design and its cable
carrier allow the track system to span multiple bays. There
are no electric cables dragging along or
cluttering up the floor.
Various options are available, floor mount, ceiling
mount or a combinaison of both.
The high-temperature halogen lamps, unique reflector and lamp array are all positioned for absolutely uniform heat distribution over the largest curing area. In addition, individual lamps can be angled to more closely match the contours of the vehicle.
CURING ZONE for the 4000TS model: 100cm x 100cm = 10,000cm2
CURING ZONE for the 8000TS model: 100cm x 200cm = 20,000cm2
CURING ZONE for the 16000TS & 32000TS models: 200cm x 200cm = 40,000cm2
The spectratek system independently maintains a constant temperature thereby ensuring the highest quality finish even with a novice operator, without fear of over baking heat sensitive substrates.
The unique reflectors that envelop the lamps are specifically designed to
direct all the lamps towars the vehicle.
Digital Control Box
Digital Control Box, is independant and
can be
positioned
on a nearby wall,
column, or
be free standing.
TISS Integrated Sensor System
TISS first helps you position the curing unit for optimum heating with an ultrasonic sensor. The sensor beeps when the unit is too far away or too
close, and becomes a continuous tone when the unit is at the
ideal distance from the vehicle.
Secondly, the integrated timer allows you to preset ramp times.
Thirdly, state of the art optical sensor and electronics regulate the heating temperature based on the panel temperature desired. The spectratek system independently maintains a constant temperature thereby ensuring the highest quality finish even with a novice operator, without fear of over baking heat sensitive substrates.
