Synergic MIG Welder with Inverter Power Source
   
   

The UltraMig 500 Inverter is a SYNERGIC Mig and digital welding machine which uses an inverter power source operated by a microprocessor.

100% microprocessor controlled. Provides synchronized  (SYNERGIC) adjustment of the welding voltage, the welding current, gas flow, and  the  wire  feed  speed  by  means  of  a  single  control knob  on  the  torch. It also controls the welding cycle in continuous, spot and stitch modes, the striking and end of the arc, and the thermal safety devices.

The wire drive   system   is   self compensating. It  comes  fitted  with  2  rollers  which adjust automatically  to  wire  diameters  of  between  0.6  and  1,2mm (.024 to .045). There is no need to adjust or remove them or to adjust the tension. It is also fitted with a wire outlet guide for 0.6 to 1.2 mm diameter steel and stainless steel.

The UltraMig 500 is equipped with a medium-duty welding torch and the necessary accessories for steel and stainless steel wire from .024” (0.6mm) to .045” (1.2mm).

Digital display for easy read out.

 

 
 
Download this document to get more information
 
Comes complete with:
Ground cable and clamp, welding cable and gun, welding tips, nozzle, gas regulator, welding wire steel and a fuse.
 
 
 


Copyright © AMH Canada 2013 - All rights reserved
FRANCAIS ENGLISH