Multi-Function Compression Spot Welder

Designed to reduce panel drilling MIG weld plugging, and grinding to a minimum.

Factory spot welds can be replicated on thin panels as well as structural metal up to 3mm thick (0.12").

Maximum welding current of 7,500 amps delivers superior performance on today's sheet metals including galvanized and high-tensile steel. A variety of accessory electrode arms for the versatile pneumatic clamp can reach up to 90% of the automobiles body.

Easily interchangable electrodes provide single side spot welding for places without access to both sides of the panel. A full complement of dent pulling accessories and heat shrinking accessories is included.

Permanently attached air cooled welding cables provide maximum flexibility and increases shop productivity.

Boom swivel arm optional.


Download this document to get more information
Standard Accessories
Pneumatic G Clamp
155mm 1/2 Offset arm
Copper straight electrode
Fender electrode
Carbon rod
Fan shape electrode
Wiggle wire tip
Standard electrode
Moulding rivet electrode
Welding nail electrode
Welding washer electrode
Gutter rail electrode
Shrinking electrode
M6 Stud electrode
M6 Nut electrode
Carbone rod adapter
Other Accessories
Slide hammer without accessory
Slide hammer c/w hook
Nail mandrel
5" Finger bear claw
Tip sharpener
Rachet key for tip sharpener
M6 nuts
Ground plate tightener
Wiggle wire 1/2lbs
M6 studs 30pcs
Welding nails 2mm 100pcs
Welding rivets 100pcs
Welding washers 100pcs

Copyright © AMH Canada 2013 - All rights reserved